How do you secure a storage cabinet to the wall?

How do you secure a storage cabinet to the wall?

There have been numerous reports of wall cabinets falling off and injuring people. So anything like that should be taken very seriously.

If you want to secure your wall storage cabinet but don’t know where to start, no worries. Here we demonstrate how do you secure a storage cabinet to the wall by following a few simple steps.

We demonstrated this during the installation process, but if you already have a cabinet that needs to be secured, you can use the same approach.

Simply manage the necessary tools and follow the instructions, and your cabinet will be completely secure.

Tools And Materials Required For Securing The Storage Cabinet To The Wall

Well, here you need to manage a set of things to accomplish the task. The majority of the tools will be widely available. You can get these either at home or at your local supermarket.

Some tools will be uncommon, but they can be obtained from any hardware store.

Here is the list of all the materials.

  • Ladder
  • Hammer
  • Nails
  • Drill machine
  • Studs/nails/bolts
  • Measuring scale
  • Stud
  • Stud finder
  • Marker
  • Screw driver

How Do You Secure A Storage Cabinet To The Wall?

There are several factors you should consider when building a wall storage cabinet. Generally, wall storage holds heavy weights. Without proper planning, the cabinet can pose a safety risk.

So let us show you how to secure the cabinet to the wall following four simple and effective steps. This will make your wall storage area secure and sustainable.

Step 1: Find The Perfect Cabinet Position

It’s critical to find a suitable location for your wall cabinet storage because a stuffy or poorly ventilated environment will damage your wooden cabinet. To begin, check to see if the wall is properly level.

If it’s not, then choose another place because it will be too dangerous to hang a heavy cabinet there.

From the floor, measure 55 inches (140 cm) and mark the point. Make a rough drawing on your wall following the cabinet size. This will give you a general idea of where the cabinet will be placed.

Mark the stud points on the drawing lines and drill holes with the drill machine. If you want to be more precise, you can use a stud finder.

Step 2: Install The Band Board

It is time to install the band board to secure the cabinet. You could also use ‘ledge board’ if you want.

Now make a horizontal line following that 55-inch (140 cm) mark. Your band board will be placed here to provide support for your cabinet. To attach the band board, you could either use nails or studs.

You don’t need to use nails if you’ve already marked the stud position. Simply place the stud in the proper location, making sure they are perfectly aligned.

Step 3: Install The Cabinet

Your half of the job is done. Now it’s time to get your cabinets ready to mount on the wall. So unhook all the doors from the main cabinet. Make sure that the cabinet is at its lightest weight.

Now start placing the cabinet on the band board. You should screw the cabinet immediately after placing it on the band board. Now do the same for all the other cabinets. When the cabinets are all set, you can remove the band board from the wall.

Step 4: Keep It Safe

Finally, double-check to see if any of the cabinets have become loose. Also, see if there’s a gap between the two cabinets that need to be filled. Finally, relocate all the doors and necessary parts of the cabinet.

Why Securing Storage Cabinet To Wall is Important

Storage cabinets are quite heavy, and these things hold a lot of weight. So, if the storage cabinet is not secured to the wall, it may cause serious damage to your home.

Consider your kitchen wall storage cabinet; if it isn’t securely attached to the wall, it could fall into your floor cabinet. And you know what will happen afterward. The same thing can happen to your floor cabinet, so it’s a good idea to secure the floor cabinet to the wall as well.

Similarly, think about your kids’ wall cabinet for books and stuff. It may cause an accident if it’s not placed properly on the wall.

Frankly, if you think about it closely, you could find lots of reasons to secure your shelving unit to the wall.

Things You Need To Follow When Securing Storage Cabinet

People often wonder if it’s possible to secure cabinet to the wall without studs. Honestly, that is possible, but the question is how safe is it? People sometimes don’t want to make any holes in their walls and try alternative ways to attach the cabinet.

To be honest, it’s a very bad approach. When securing the storage cabinet, you must attach it with studs or nails. Otherwise, if you follow any alternative methods, you’ll be putting yourself at risk. The reason is that it will not be sustainable.

Another big mistake is not using a ledge board. People often skip this part to save money. Unfortunately, this is a very bad decision.

The weight of the cabinet is supported by the ledge board. When you are not using it, the cabinet may accidentally fall on you.

Quick heads up! Never try to attach a shelf to wall without screws; it won’t last anyway.


Hope this guide answers your question how do you secure a storage cabinet to the wall? Securing a wall cabinet or shelf is an often overlooked part of the installation.

So we started with the basics of why it’s important to secure storage cabinets to the wall. Later, we summarized the entire procedure in just four steps.

By following those steps, we have shown how securely the cabinet can be mounted. In order to make your job easier, we also provide a list of the necessary tools and materials.

Finally, we provided some helpful suggestions that will assist you during the installation.

As an Amazon Associate I earn from qualifying purchases.

Leave a Comment